Wama Yachts' new flagship is slim enough to berth like a sportscat, opens out to nearly the width of a cruising cat, and is aiming for 45 knots.
Last week Go Boating reported that Tunisia's boatbuilders want to double their exports by 2030. The country has gone from about 20 yards to around 75 in a decade, Montassar Dhiaf of Tunisia's Marine Industries Association told Reuters, and its yards are no longer content to make parts for other people's boats. They want to build the whole boat.
Born of a bad boat
Wama is one of those yards, and like plenty of boatbuilders, it started with a disappointment. Marketing director Ramy Wasli told Multihulls World that the president of the yard's parent group, Walid, bought a boat he didn't like and decided to build one that suited him better. That one-off became a brand, named for Walid and his wife, Mariam.
It didn't take long to get noticed. The yard's 42 XL won the power under 45 ft category at the 2026 Multihull of the Year awards. Now Wama has gone bigger. The Wama 52 Power is a 15.85 m aluminium catamaran with hydrofoil assistance, and it does something clever with its width.
A boat with two widths
Tied up with its terraces closed, the 52 is 5.40 m wide. Fold them out and it stretches to 7.69 m, gaining more than two metres of deck.
It also draws just 0.70 m, which should get it into shallower anchorages than most boats its size. Displacement is listed at 21.4 tonnes, with 3,000 litres of fuel and 900 litres of water.
Wama is aiming for a 30 knot cruise and a 45 knot top end, though it hasn't yet said which engines will get it there.
Built to run, not just to float
Most power cats this size are floating apartments first and boats second. Aquila's 50 Yacht, at 15.9 m, cruises at 18 to 19 knots and tops out at 22, on a fixed 7.76 m beam. With its terraces open, the Wama gives you nearly the same deck width, but it is designed to cruise ten knots faster but carries almost twice the fuel to do it.
The nearest thing to it is the Sunreef-built Brabus Ultima 55, which uses the same recipe of slim hulls, fold-out platforms and foils. It's listed at 17 m, 5.6 m wide and 7.6 m opened up, with 1,450 hp and a top speed of over 40 knots. The Wama is a metre shorter, chasing a higher top speed, and draws half the Ultima's 1.4 m. And where the Brabus goes the composite route, the Wama is welded aluminium.
Aluminium and foils
Wama builds its hulls from marine-grade 5083 aluminium, welded entirely by hand, and each boat takes 12 to 18 months to build. Almost everything happens under one roof, from the hulls and wiring to the joinery, interiors and carbon fibre parts.
The foils are central to how every Wama power cat is designed. As the boat picks up speed, the foil generates lift and carries some of its weight, while the hulls stay in the water. Wama says that improves speed, efficiency, comfort, fuel use and stability.
Now the 52 has to prove its numbers.